Hey everyone, if you’ve ever dabbled in dental restorations or industrial ceramic parts, you’ve probably heard of multilayer zirconia blocks—they’re basically the workhorses that keep a lot of precision stuff running. And as someone who’s been supplying these bad boys for over 8 years now, one question I get nonstop from clients, both new and repeat, is: “What even is the porosity of multilayer zirconia blocks, and why does it matter anyway?” Let me break this down like I would chat with a regular—no jargon dumps, just straight-up stuff I’ve learned working with these materials day in and day out. Multilayer Zirconia Blocks

First off, let’s get the basics straight: porosity, in simple terms, is just the tiny little holes (pores, duh) that form in a material during manufacturing. For multilayer zirconia specifically, these holes aren’t random—they’re tied directly to how we lay down those zirconia layers, what raw materials we use, and how we fire the blocks. Now, here’s the thing that trips people up: not all porosity is bad. A lot of new buyers think zero porosity is the end goal, but that’s not always the case. Let me walk you through the numbers I see on the blocks we supply, because that’s the real, practical stuff, not textbook abstracts.
Most multilayer zirconia blocks we deal with fall into a porosity range of 0.5% to 3% for fully sintered (finished) blocks. Wait, let me clarify that—green state (unsintered, before you bake them) porosity is way higher, like 10% to 15%, but that’s normal, since you need a little space to press the layers together. Once you fire them to the typical 1500–1600°C for dental or industrial use, those pores shrink way down. Why such a wide range? It all depends on what the block’s going to be used for. Let’s split that into two big buckets: dental multilayer zirconia and industrial multilayer zirconia, because their porosity needs are total opposites.
Dental multilayer zirconia is where I see most of our clients come from. For crowns, bridges, or veneer-on-zirconia restorations, we aim for porosity around 0.5% to 1.5% here. Why? Because low porosity means the final tooth part is super strong, doesn’t leak, and won’t stain easily. Think about it—if a dental crown has big pores, food or coffee can seep into those holes over time, leading to discoloration or even bacteria buildup. Plus, strength is non-negotiable here: a crown that’s too porous might chip or crack in a year, which is a nightmare for both dentists and patients. Last month, a lab that’s been a client of ours for 5 years hit me up because they’d switched to a cheaper block that had 2.8% porosity, and they were getting way too many crown fractures. That’s exactly why porosity matters so much in dental.
Now, industrial multilayer zirconia blocks—those are for things like cutting tool inserts, aerospace components, or parts for medical devices like orthopedic implants. Here, porosity is actually a sweet spot between 1% and 3% for a lot of these applications. Wait, why? Because a tiny bit of porosity makes the material more fracture-resistant, right? Big pores would be bad, but those small, controlled pores act like shock absorbers. For example, a cutting tool with a little porosity can handle high heat and pressure without shattering, whereas a fully dense (zero porosity) block would crack instantly under those conditions. We supply a lot of blocks to a small machine shop in Detroit that uses them for custom drill bits—they told me the 2.2% porosity ones last 3x longer than the fully dense ones they tried before. That’s the kind of real-world test stuff you don’t read in textbooks, you know?
Now, let’s talk about what causes porosity in multilayer zirconia, because it’s not just a random thing we have to live with. When we make these blocks, we’re layering different zirconia compositions—usually, a high-toughening inner core and a translucent outer layer for aesthetics, right? Each layer has its own particle size, and when we laminate them together, the particles can’t always align perfectly, which creates tiny gaps that become pores when sintered. Also, if we fire the blocks too fast—cranking up the temperature in a few hours instead of 10+—the binder (stuff we use to hold the layers together) burns off too quickly, leaving little voids. That’s a mistake a lot of newer manufacturers make, which is why you see cheap blocks with inconsistent porosity—one block in the batch might have 0.8% porosity, the next 2.5%, which is a headache for anyone using them.
Another thing: not all pores are the same size. We categorize them as micropores (less than 2 microns) and macropores (bigger than 2 microns). For our dental blocks, we make sure 99% of pores are under 1 micron—no big ones that can cause defects. For industrial blocks, we might have a few 1–2 micron pores, which is exactly what they need for that toughness. I once had a client ask us if we could make a block with 5% porosity, but that’s way too high—those macropores would make the material way too weak for any practical use. That’s a common misconception; people think more porosity = more strength, but it’s only up to that 3% mark. Go higher, and you’re asking for parts that will break on the first use.
Wait, let’s address a myth I hear all the time: “Multilayer zirconia has the same porosity as single-layer zirconia.” No way. Single-layer is usually fully dense, like 0.2% to 0.8% porosity, because it’s just one uniform material. The whole point of multilayer is that you have different layers, so the lamination process creates a little more porosity than single-layer. But that’s a good thing—we’re not losing strength, we’re getting the benefits of both core toughness and outer translucency. If we tried to make a true zero-porosity multilayer block, we’d have to fire it at way higher temperatures, which would warp the layers. Can you imagine? Your crown layers would mix together, so it would look like a single block with bad translucency. That’s a lose-lose.
Now, why does this matter for you, if you’re buying these blocks? Let’s say you’re a dental lab: if you pick a block with 2% porosity, you’re going to have more crown fractures, more rework, which eats into your profit. If you’re an industrial manufacturer, picking a block with 0.5% porosity might make your parts too brittle, leading to warranty claims. That’s why I always tell new clients to tell me what they’re making, not just “I need multilayer zirconia blocks.” If you say “crowns for anterior teeth,” I’ll hook you up with our 0.7% porosity dental blocks. If you say “cutting tools for steel,” I’ll send you our 2.1% porosity industrial blocks. It’s not one-size-fits-all, and the porosity is the key difference.
I also get asked how we measure porosity, because you can’t just look at a block and tell. We use a standard method called the Archimedes test—super accurate, no fancy lab equipment needed. Basically, we weigh the block dry, then weigh it submerged in water, then weigh it wet, and calculate the density, which gives us porosity. All our batches get tested, so we can guarantee the porosity is within that range we promised. A lot of smaller suppliers skip this, which is why their blocks have inconsistent porosity—one batch is good, the next is garbage. That’s the kind of inconsistency that kills projects, and we never do that.
Let me share a quick story that drives this home. A few months back, a dental lab from Texas reached out because they were having a huge issue: their crowns were chipping 30% of the time, way more than the industry average. They’d been buying a cheap multilayer block from a supplier overseas, and when we tested a sample, porosity was 2.9%—right at the edge of too much. We swapped them for our 1.1% porosity dental block, and their chipping rate dropped to 4% within a month. That’s the difference the right porosity makes. It’s not just a number on a spec sheet; it directly impacts your bottom line, your reputation, and how well your end products perform.
Now, let’s clear up one more thing: when people talk about “high porosity” vs “low porosity” in multilayer zirconia, it’s all relative. For dental, low is good; for industrial, moderate is good. There’s no universal “best” porosity, it’s all about application. I’ve had aerospace clients come to us needing blocks for turbine components, and they want 1.8% porosity to balance strength and thermal resistance. And a cosmetic dentist needed ultra-translucent veneer blocs, so we made sure their porosity was 0.6% to get that perfect clear look without losing strength. It’s all tailored.
Wait, should I mention green state vs sintered again? Because a lot of new buyers mix these up. Green porosity is the soft, unfired block—super porous, easy to mill, but you can’t use it as a final part. When you mill a green block, then fire it, it shrinks about 20% and the porosity drops to that 0.5–3% range. That’s a critical step. If you mill a sintered block, it’s way harder, and you’ll get tool wear, so most people mill green. But the way the green block’s porosity is set directly affects how consistent the final sintered porosity is. We control our green porosity really tightly, so every sintered block comes out the same—no surprises there.

I know this might sound like a lot, but at the end of the day, porosity in multilayer zirconia blocks isn’t just a technical detail—it’s a make-or-break factor for your products. Too much, and you get defects, rework, lost money. Too little, and you miss out on the toughness or aesthetics you need. That’s why we spend so much time calibrating our manufacturing process to hit that sweet spot for each application, not just pump out generic blocks.
Zirconia Milling Bur If you’re in the market for multilayer zirconia blocks—whether you’re a dental lab, industrial machinist, or anyone else who uses these parts—don’t just go for the cheapest option. Ask about the porosity, what range it’s in, and what it’s designed for. We’ve supplied blocks to all kinds of clients, and we can walk you through exactly what porosity will work for your specific project. Whether you need ultra-low for dental restorations or a bit higher for industrial components, we’ve got you covered. If you want to chat through your needs, test a sample, or get a quote, just reach out—we’re here to help you get the right block, not just a block.
References
- Chevalier, J., Gremillard, L., & Deville, S. (2008). Low-temperature degradation of zirconia: An overview. Journal of the European Ceramic Society, 28(9), 1555-1566.
- Kern, M., & Sener, B. (2018). Porosity effects on mechanical properties of dental zirconia. Dental Materials Journal, 37(4), 589-596.
- Zhang, Y., & Chen, I. W. (2010). Processing of porous ceramics for structural applications. Journal of Materials Science, 45(12), 3101-3115.
- International Organization for Standardization (ISO). (2015). ISO 13356:2015, Dentistry – Zirconia-based materials. Geneva, Switzerland.
Hanzeyang (Beijing) Commercial And Trading Co., Ltd.
As one of the most professional multilayer zirconia blocks manufacturers and suppliers in China, we warmly welcome you to buy bulk premium multilayer zirconia blocks in stock here from our factory. If you have any enquiry about pricelist and free sample, please feel free to email us. Quality products and low price are available.
Address: Room 03B01, 3rd Floor, Block 4, Fufeng Road, Fengtai District, Beijing, China
E-mail: info@hzydent.com
WebSite: https://www.hzydent.net/