Posted in

What is open loop control for industrial drives?

If you’ve ever watched a production line at a factory—say, a conveyor belt moving packaged goods at a steady speed, or a packaging machine dispensing the exact amount of adhesive for each box—you’ve probably seen industrial drives at work. Most people fixate on closed-loop systems these days (they get all the hype for being precise), but today I want to talk about the workhorse that keeps a lot of that basic, rock-solid operation running: open loop control for industrial drives. As someone who’s been in the industrial drives game for over a decade, I’ve seen way too many customers jump straight to closed-loop solutions without realizing how perfect open loop is for 70% of their everyday needs. Let’s break this down like I’d explain it to a new plant manager who’s not a drives nerd. Industrial Drives

First, let’s cut through the jargon. What even is open loop control for industrial drives? Think of it like driving a car on an empty, straight highway with cruise control set to exactly 65 mph. You punch the set button, and the car’s engine and throttle adjust automatically to keep that speed—no one’s watching a speedometer and tapping the gas to tweak it every two seconds. There’s no feedback loop here; you set a fixed input (the 65 mph), and the system does its best to hit that target without checking if it actually did, until you change the input. That’s exactly how open loop control works for electric motors, which are the core of every industrial drive. The drive takes a command signal—like a 0-10V voltage that tells it “run at 500 RPM”—and sends that signal to the motor, adjusting power to maintain that speed. No encoder (the feedback device that tells a closed-loop drive “wait, we’re going 490 RPM, speed up”) involved.

Let’s contrast that with closed loop real quick, because it’s easy to mix them up. Closed loop is like driving that same car on a winding mountain road—you glance at the speedometer, adjust the gas or brakes every time you drift off, and even correct for wind or hills that push you off target. That’s great for precision jobs, like a robotic arm lifting a 100lb part or a spindle cutting a custom metal part to a thousandth of an inch. But for repetitive, consistent tasks where the load doesn’t change much? Open loop is way simpler, cheaper, and less likely to break down.

Now, let’s get into where open loop actually shines in industrial settings. I’ve seen this play out at food and beverage plants all the time. Take a conveyor belt moving cans down a line to a labeling machine. The line’s running nonstop, the weight of the cans is nearly identical every time, and the target speed is just “keep the cans moving at a pace that feeds the labeler without jamming.” An open loop drive set to, say, 120 feet per minute will do that job perfectly for years. No need to add an encoder (which is an extra part to buy, install, and maintain) or a controller to process that feedback. It’s just… set it and forget it, for the most part.

Another big use case: fans and pumps. HVAC systems for warehouses, or water pumps moving water through a municipal treatment plant (wait, no, let’s keep it industrial—say, a pump circulating coolant through a metal stamping line’s die cast molds). The load here is pretty steady. A centrifugal pump’s power draw changes with speed, but if you’re running at a fixed speed (or even a speed that only changes with a simple schedule, like “turn up in summer”), open loop control is more than enough. I had a customer last year who replaced a closed-loop drive on their warehouse exhaust fan with an open loop unit from our line. Saved them $1,200 upfront, and in 18 months they haven’t had a single issue—no encoder to replace, no extra wiring to troubleshoot.

But here’s the thing I want to make clear: open loop isn’t for every job. Let’s call that out so no one wastes time or money. If your load varies wildly? Like, a crane lifting steel beams where the weight can go from 500lbs to 10,000lbs in 10 seconds? Open loop will struggle—crank that power for the heavy load, and when you drop a light load, the motor will spin too fast. That’s a safety hazard, and it damages equipment. Or if you need super precise position control—like moving a robotic arm to grab a part from a bin, where it needs to stop within a fraction of an inch? Open loop can’t do that, because there’s no feedback to tell it “you’re 0.2 inches off target, adjust now.” It only knows what you told it to do, not if it actually did it.

Now, let’s talk about why people might overlook open loop these days. A lot of new drive tech comes with fancy closed-loop features, so salespeople will push that as the “latest and greatest” no matter the application. But as someone who works with industrial operators every day, 9 out of 10 times, if you’re not doing something that requires precision or handling variable loads, open loop is the smarter pick. It’s more reliable because there’s fewer parts that can fail. Less wiring means less chance of electrical noise messing with signals (we’ve all had a drive act wonky because a feedback cable got loose and caused a false reading—open loop avoids that entirely). And it’s cheaper, plain and simple. The drive itself is 20-30% less expensive than a comparable closed-loop unit, and you don’t have to pay for encoder installation or ongoing maintenance for that extra hardware.

Wait, let’s add a real example from my own work to make this concrete. A few months back, I helped a small automotive parts shop troubleshoot their stamping line. They had a closed-loop drive on their feed roller that was constantly throwing speed errors, costing them 2-3 hours of downtime every week. The problem? The encoder was mounted on the motor shaft, but the feed roller was 10 feet away, and vibration from the stamping press was loosening the encoder cable, causing bad feedback. I suggested swapping it for an open loop drive. Now, they set the speed once when they change the part being stamped, and haven’t had an error in 6 weeks. They saved about $800 on the drive, and the downtime alone is worth way more than that. That’s the kind of win that open loop delivers that closed loop just can’t, because it eliminates a fragile component.

Another common misconception: open loop is only for old, outdated technology. Nope—modern open loop drives have come a long way. Back in the day, open loop was basic VFDs (variable frequency drives) that only ran at fixed speeds and couldn’t handle much. Now, contemporary open loop drives have vector control built in. Wait, what’s vector control? Simply put, it’s a way to control both the speed and torque of an AC motor without an encoder. It adjusts the current and frequency sent to the motor to make it more responsive to load changes than the old scalar control (which just set frequency, not current). So a modern open loop vector drive can handle light load variations a lot better than the open loop drives of 10 years ago. That’s why it’s still relevant today, not just a relic of the 90s.

Let’s break down how that works technically, in plain English, not textbook stuff. A standard scalar open loop drive just changes the frequency of the power sent to the motor to adjust speed. But that means if the load on the motor goes up (like a conveyor belt full of heavy boxes), the motor will slow down a bit, because it’s not getting feedback to tell it to add more power. A vector open loop drive calculates how much torque the motor needs based on the frequency and voltage it’s sending, and adjusts that power on the fly to keep the speed consistent within a tight range—usually within 2-3% of the set speed, which is more than enough for most industrial applications. That’s a huge upgrade, so open loop isn’t the clunky system it used to be.

Now, when should you actually choose open loop? Let’s make a quick checklist, because plant managers love checklists. First, does your application require speed control without extreme precision (like, within 5% is fine)? Second, is your load relatively consistent—no huge jumps in weight or demand? Third, do you want to avoid extra parts and maintenance? Fourth, is upfront cost a consideration? If you answered yes to most of these, open loop is worth a look.

When to skip it? If you need speed control within 1% or better, or need accurate position control (like indexing a conveyor to drop a part exactly at a spot for packaging). If your load varies drastically—like a crane, a hoist, or a conveyor that carries both empty pallets and full pallets of raw materials. If safety is a top concern where overspeeding could cause injury or damage, closed loop’s feedback can act as a safeguard. For those cases, closed loop is the right call.

I get it, switching to a new control method can feel daunting. You might be used to closed loop, or worried that open loop is too simple to work for your facility. But here’s the thing: most industrial facilities have a mix of both. I’ve worked with plants that have 50 drives total—40 open loop on conveyors, fans, pumps, and 10 closed loop on robotic arms and precision machinery. That’s the sweet spot. You don’t need to overengineer every part of your line. Use the right tool for the job.

As a drives supplier, I see so many customers waste money by buying closed-loop systems when open loop would work just as well. They see the “high-tech” closed loop ads and think that’s the only way to go, but when we walk through their application, it turns out they just need something that runs consistently without fuss. We carry a full line of open loop industrial drives, from basic scalar units for simple conveyor jobs to modern vector open loop drives for applications that need a bit more torque response. All of them are built to last—we test every unit before it leaves the warehouse, and our team is here to help you pick the right one for your specific line, no sales pitch, no pressure.

If you’re dealing with constant drive downtime, overpaying for drive maintenance, or just want to make your production line run smoother, it’s worth taking a closer look at open loop control. You might be surprised how much you can simplify your operations without sacrificing performance. Don’t just take my word for it—talk to other plant managers in your industry. Most will tell you their most reliable drives are the open loop ones that just keep going, no fancy parts needed.

At the end of the day, industrial drives are all about matching the technology to what you actually need. Open loop isn’t the answer for every problem, but it’s a perfect solution for a ton of everyday industrial tasks that keep your operation running. If you want to chat about whether open loop control is right for your facility, or just learn more about our line of drives, feel free to reach out and connect for a conversation. No jargon, no hard sell, just real talk about what works for your production.


Motor Control & Starters References

  1. Bose, Bimal K. "Modern Power Electronics and AC Drives." Pearson, 2002.
  2. "Open Loop vs Closed Loop Control in Industrial Automation." Automation.com, 2021.
  3. Miller, Timothy J.E. "Brushless Permanent-Magnet and Reluctance Motor Drives." Oxford University Press, 1989.
  4. "Variable Frequency Drives: A Practical Guide for Industrial Users." Energy.gov, 2019.

Xiamen Shengcheng Automation Co., Ltd.
As one of the most professional industrial drives suppliers in China, we offer a wide range of products with superior quality. Please rest assured to buy bulk discount industrial drives from our factory. For price consultation, contact us.
Address: Room 1104, Building A, No.1 Golden Bay Fortune Center, No. 999, Anling Road, Heshan Street, Huli District, Xiamen City, Fujian Province, China
E-mail: sales@cn2014.com
WebSite: https://www.autelectrical.com/