If you’ve ever worked in industries like oil and gas, geothermal energy, or industrial plumbing, you know that coiled pipe isn’t just a flexible alternative to straight pipe—it’s a game-changer for projects that need to navigate tight spaces, reduce material waste, and cut down on installation time. But for years, the biggest pain point our team at [Our Coiled Pipe Supplier Name] has heard from contractors, engineers, and maintenance teams is this: installing coiled pipe vertically. Unlike laying it on a flat worksite or running it horizontally along a wall, vertical coiled pipe install throws curveballs at every turn—from managing that spring-loaded coil tension to making sure it’s secured properly without kinking, and getting it aligned perfectly between two fixed points (think well casings, storage tanks, or vertical process lines). Coiled Pipe

I’ve spent the last 12 years working in this space, first as a field technician troubleshooting bad installs that cost thousands in downtime, then moving into sales and product support for our coiled pipe line. Today, when a client calls panicking because their vertical coiled pipe install went wrong (they had a kink that required cutting 20 feet of pipe, or a loose fitting that leaked under pressure), I don’t just walk them through a fix—I give them the step-by-step process we’ve refined over hundreds of projects, all while making sure they use our products correctly. This post isn’t just a general “how-to”—it’s the lessons we’ve learned from working with our own coiled pipe inventory, tailored to the unique challenges of vertical installation.
Before you even touch the pipe, let’s talk about the pre-install checks that will make or break your project. I can’t tell you how many times a contractor shows up to a well site with a roll of uncalibrated coiled pipe, only to realize it’s rated for 100 PSI but they need 300 PSI, or that it’s been stored in the sun for weeks and the plastic liner’s softened to the point of cracking. For vertical installs, you have to prioritize tension management first. Coiled pipe is manufactured on large spools, and when it’s rolled tight, it retains that “memory”—it wants to curl back into a coil, which means when you lift it vertical, it’s going to try to twist or kink if you don’t release that tension gradually.
First, verify the pipe’s specifications against your project’s requirements. Our team labels every spool clearly with working pressure, material grade (HDPE, PVC, or stainless steel braided, depending on your use case), and maximum temperature range—don’t skip reading that tag. For vertical installs, I always recommend going one pressure rating higher than you think you need. If you’re running a vertical line to a storage tank holding 150 PSI, get a pipe rated for 200 PSI. That extra margin helps with the dynamic tension as you run it down, and it reduces the risk of failure mid-install.
Next, prep your worksite. Vertical coiled pipe installs don’t happen in a vacuum. You need a stable anchor point at the top (where the pipe will connect to the existing line or tank), a way to feed the pipe down without it dragging on sharp edges, and a way to control the descent—no letting the pipe unspool on its own, that’s how you get knots. If it’s a well installation, you’ll need a rig that can hold the spool at a 45-degree angle, not straight up and down. Wait—why 45 degrees? If you hold the spool vertical, the pipe will unspool too fast, building up tension that causes kinks as it drops the last 10 feet. If you angle it slightly, you control the rate of unspooling. For smaller jobs, like a vertical process line in a refinery, a sturdy tripod or even a heavy-duty ladder with a clamp to hold the spool works fine, as long as it’s not moving.
Also, inspect the end of the pipe before you start. When coiled pipe is cut, the end can have sharp burrs or uneven edges that will catch on pipe hangers, well casing walls, or any other obstruction as you feed it down. Use a deburring tool to smooth the end, and if it’s plastic, gently heat the tip with a torch (on the lowest setting) for 2 seconds to seal any micro-cracks that might have formed during spooling. I learned that trick early on—our first vertical install for a geothermal project had a kink because a sharp burr cut into the pipe wall as it dropped, and that 6-inch section had to be replaced. Don’t let that be you.
Now, the part everyone struggles with: unspooling and feeding the pipe vertically. This is where the wrong move leads to kinks, and kinks are a death sentence for coiled pipe. A coiled pipe kink creates a permanent bend that reduces flow rate by up to 70% and can cause pressure spikes that burst the pipe. So take it slow, follow this step-by-step, and don’t rush.
Start at the top. Attach the end of the pipe to the upper anchor point first. This is non-negotiable. If you try to feed the pipe down first, you’ll have to lift the entire weight of the coil to connect the top, which adds unnecessary tension. Our technicians use a heavy-duty adapter that’s made specifically for our coiled pipe fittings—we design these in-house to handle the tension of vertical lifts, so they don’t slip. Secure that connection tightly, then double-check it. Give the pipe a gentle tug to make sure it’s locked in.
Once the top connection is secure, you need to guide the pipe down. Here’s the key: use a guide. For large-diameter coiled pipe (2 inches and up), we recommend a PVC guide sleeve that’s slightly larger than your pipe’s diameter, running the full length of the vertical run. For smaller sizes, a series of U-shaped hangers spaced every 3 feet will work, just make sure the inner surface of each hanger is smooth—no sharp edges, no rust, no burrs. I’ve seen installers use metal hangers that have a rough weld seam, and the pipe dragged on that, creating a tiny scratch that turned into a leak after a month of use. We offer custom guides for our clients too, made to fit their exact pipe size and vertical run length—just ask our product support team when you order your spool.
Now, control the tension as you feed the pipe. This is where the spool holder comes in. If you’re using a mobile spool cart (which is standard for most vertical jobs), add a brake to the cart. You don’t want the pipe to unspool faster than you can guide it. As you feed the pipe down, go at a steady pace—1 foot every 5 seconds is perfect for 2-inch pipe, slower for larger sizes. If you notice the pipe starting to twist, stop, gently lift the section up 6 inches, and then feed it back down straight. That twist usually happens because the coil’s memory is trying to pull the pipe back up, so lifting it a bit releases that tension. I once had a client try to feed 500 feet of coiled pipe down a well in 2 minutes flat, and it got so twisted he had to pull 200 feet back out and re-feed it. Save yourself the time, take it slow.
Wait a second—what about when you’re at the bottom? The lower connection point, right? That’s another common mistake. A lot of installers just cut the pipe to length and attach the fitting, but if the pipe has tension built up from being coiled, it will contract after you cut it, leaving a gap between the pipe and the fitting. That’s a leak waiting to happen. So here’s our pro tip from the field: before cutting the pipe to final length, let it hang freely for 10 minutes. The tension from the coil will ease out, and the pipe will stretch or contract a little (usually about 1 to 2 inches per 100 feet, depending on material). Measure the distance between the lower anchor and the pipe’s tip after those 10 minutes, then cut it ¼ inch longer than that. That extra bit of length will take up the contracted tension, so when you attach the fitting, it’s tight and secure, no gaps, no leaks.
Once you have both ends connected, the next step is securing the pipe along the vertical run. Don’t just leave it hanging—even with a guide, coiled pipe will sway a little, especially if there’s pressure running through it. Use pipe hangers rated for coiled pipe, not regular steel pipe hangers. Coiled pipe is flexible, so regular hangers that clamp too tight will constrict the pipe, leading to damage over time. Our hangers have a padded inner lining that fits the pipe snugly but doesn’t squeeze it, and they’re engineered to handle the dynamic movement from pressure changes. Space them every 4 feet for small-diameter pipe, every 6 feet for large-diameter pipe. If you’re working in an area with high wind (like an outdoor vertical run to a storage tank), add extra hangers every 2 feet to prevent swaying.
And one last step before you pressure test: do a visual inspection from top to bottom. Walk the full length of the pipe, check for any kinks, any scratches, any places where the pipe is rubbing against a wall or a casing. We always give our clients a pre-install check list with 10 items to inspect, and I’ve had more than one client find a small kink that would have turned into a failure during testing. If you do find a kink, don’t panic—for minor kinks (less than 20% of the pipe’s diameter), you can gently warm the area with a heat gun (set to 150°F for HDPE, lower for other materials) and slowly bend it back into shape. For major kinks, just cut that section out and use a coupling to join the two ends. It’s better than dealing with a burst pipe mid-operation.
Now, let’s talk about common mistakes we see, and how to avoid them. First mistake: not accounting for the coil’s memory. We’ve had clients who ordered 1000 feet of coiled pipe, installed it, and then found that the top connection pulled loose because the pipe contracted. That’s exactly why we recommend letting it hang before cutting. Second mistake: using the wrong guide or hanger. A client in Texas used a rough metal hanger for 3-inch stainless steel coiled pipe, and after 6 months, the hanger had worn through the outer coating, causing corrosion that led to a leak. Third mistake: rushing the feed. A geothermal company in Wyoming tried to feed coiled pipe down a 300-foot well in 5 minutes, and got a knot that required pulling the entire 300 feet back up—cost them a full day of work and a damaged pipe.
At the end of the day, vertical coiled pipe installation isn’t rocket science, but it does require respect for the material’s properties. That’s why we don’t just sell you a spool of pipe—we provide product support, custom guides, and step-by-step checklists based on the exact project you’re working on. Whether you’re a small contractor doing a residential well, or a large industrial team running lines for a refinery, our team has worked on projects just like yours, and we can help you get it right the first time.

If you’re planning a vertical coiled pipe install, or you just want to learn more about how our products are designed to make your job easier, don’t hesitate to reach out. We’re here to answer questions, provide technical support, and make sure you have everything you need to complete your project on time and on budget.
Stainless Steel Flange References
- Coiled Pipe Installation Best Practices, American Society of Mechanical Engineers (ASME), 2021.
- Vertical Coiled Pipe Tension Management Guidelines, National Association of Pipe and Valve Industries (NAPVI), 2022.
- Field Test Reports on Coiled Pipe Kink Resistance, Industrial Pipeline Engineering Journal, Volume 18, Issue 3, 2023.
- HDPE Coiled Pipe Installation Standards, Plastic Pipe and Fittings Association (PPFA), 2020.
Lifeng Industry Group Co., Limited
As one of the most professional coiled pipe manufacturers and suppliers in China, we’re featured by quality products and low price. Please feel free to wholesale high-grade coiled pipe in stock here from our factory. Contact us for more details.
Address: 406 Guotai Oriental Plaza, No.9 Renmin East Road, Zhangjiagang City, Jiangsu Province, China
E-mail: michael@lifengroup.com
WebSite: https://www.lifengtube.com/