Posted in

How to clean woodpulp PP nonwoven products?

Hey everyone, Woodpulp and PP Nonwoven

If you’ve ever walked down the cleaning supplies aisle, you’ve probably grabbed a pack of those soft, absorbent wipes labeled “woodpulp PP nonwoven” and thought, “That’s just a fancy name for disposable cloths.” But as someone who’s spent the last 8 years working with these products—first in our lab testing formulas, then on the production floor, and now as part of the sales team for a woodpulp and PP nonwoven supplier—I can tell you there’s way more to them than meets the eye. And if you’re using them in your business (or even just at home), cleaning them might not be something you’ve thought much about… but it should be.

Wait, hold on—“cleaning” a product that’s often made for single-use? Let me clarify. When I say cleaning woodpulp PP nonwoven, I’m not talking about tossing a $1 wipe in the wash and reusing it (though some people do, and I’ll cover that later). I’m talking about properly maintaining the tools, equipment, and even the product itself when it’s being stored, prepped, or used in settings where cross-contamination is a real risk—think medical facilities, food service kitchens, industrial manufacturing plants, and even the janitorial teams that keep office spaces running. Because these nonwovens are a mix of two materials: woodpulp (the natural, absorbent part) and PP (polypropylene, the synthetic, durable part), their cleaning needs are specific. Mess it up, and you could turn a product designed for hygiene into a source of germs.

Let’s start with the basics for anyone new here: what exactly is woodpulp PP nonwoven? We manufacture it by blending bleached woodpulp fibers (usually from sustainable softwood trees like pine) with PP filaments. We don’t just mix them willy-nilly—we use a hydroentanglement process, where high-pressure water jets lock the fibers together without using heat or harsh chemicals, to create a fabric that’s both soft enough to wipe a baby’s highchair and strong enough to scrub a grease-stained grill. The woodpulp gives it that plush, moisture-wicking feel, while the PP adds resistance to tearing, chemicals, and mildew. That combination makes it way better than pure cotton or pure plastic for most cleaning tasks—but it also means its two components react differently to cleaning agents, water temperature, and agitation.

I learned this the hard way early on in my career. A few years back, we had a client in the restaurant industry who was washing their used nonwoven wipes to cut costs, and they were using boiling water and a heavy-duty detergent. By the time they brought the next batch to our lab for testing, half the rolls were coming apart at the seams, and the woodpulp had turned yellow and brittle. They thought more heat and soap would mean a deeper clean, but they damaged the product in the process. That’s the mistake a lot of people make: treating nonwovens like traditional textiles. You can’t just wash them like jeans or towels.

So let’s break down the right way to clean woodpulp PP nonwoven, split into two main categories: cleaning the product when it’s in your facility (like if you’re a manufacturer handling raw materials, or a warehouse storing finished goods) and cleaning it when it’s being reused (yes, some people do this, and it works if done correctly). We’ll also cover how to keep your tools that process or use these nonwovens clean, because that’s a big part of preventing contamination.

First, cleaning woodpulp PP nonwoven raw materials and finished goods. Let’s say you run a facility that converts our nonwoven into wipes, or you’re a distributor storing bulk rolls. Dust, moisture, and even ambient bacteria can build up over time, especially if you’re working in a high-humidity area. The goal here is to remove contaminants without compromising the fabric’s structure. Here’s the step-by-step process we recommend to all our industrial clients, tested over hundreds of cycles in our quality control lab.

Step 1: Inspect the product first. Before you even think about cleaning, do a quick visual check. For bulk rolls, look for any signs of surface contamination—dark spots, mold, or fine metal shavings (common in manufacturing plants where metal tools are used). For sheets or pre-cut wipes, check for frayed edges or areas where the woodpulp and PP are starting to separate. If you see these, that product is already compromised, and cleaning it won’t fix the structural damage. Toss it (or if it’s raw material with metal shavings, dispose of it properly per OSHA guidelines) and move on.

Step 2: Choose the right cleaning agent. This is non-negotiable. You should never use harsh, chlorine-based bleach, acidic cleaners like vinegar (wait, no—let’s correct that: white vinegar is acidic, and even though it’s common for home cleaning, it breaks down the woodpulp fibers over time. Stick to neutral pH cleaners only. Neutral pH means a pH of 6 to 8, right in the middle of the scale. Why? The PP component is resistant to most chemicals, but woodpulp is a cellulose fiber, which is sensitive to extreme pH levels. Chlorine bleach will turn the woodpulp yellow and weaken it, while strong acids or bases will eat away at the fiber bonds, making the nonwoven fall apart. We recommend using a mild, food-safe or hospital-grade neutral detergent—something labeled “pH-balanced” and free of bleach, ammonia, and fragrances. For light dust or surface contamination, even a 1:10 mix of that detergent and warm water works.

Step 3: Clean gently, no harsh agitation. This is the biggest mistake we see. A lot of people want to scrub or agitate the nonwoven to get it “super clean,” but that’s exactly what makes the fibers separate. If you’re cleaning raw rolls or large sheets, you can wipe them down with a soft microfiber cloth dampened (not soaking wet!) with your detergent solution. If you’re handling smaller pre-cut wipes, don’t toss them in a washing machine unless you use a very gentle cycle, and even then, only if the label says it’s safe for reuse. Wait—speaking of reuse, that’s a whole other section. But for raw materials, hand-wiping or light spraying is best. Never put woodpulp PP nonwoven in a dryer, by the way—high heat will melt the PP filaments and shrink or warp the fabric. Air-dry only, in a well-ventilated area away from direct sunlight, which can also break down the woodpulp over time.

Now, what about if you’re someone reusing the nonwoven wipes? I’ll be honest—we don’t recommend this for medical settings or food service, where cross-contamination is a major risk. But for home use, like cleaning your car or tools, it can be a way to cut down on waste, as long as you do it right. We’ve tested home-reused nonwovens and found that they’re safe for non-food, non-medical tasks if cleaned properly. Here’s how to do it without ruining the wipe.

First, only reuse wipes that were used for non-greasy, non-hazardous tasks. If a wipe was used to clean raw meat juice, toxic chemicals, or bodily fluids, throw it away. Reuse only wipes that were used for light cleaning, like dusting, wiping down countertops, or cleaning windows.

Then, pre-rinse immediately after use. Don’t let the dirt dry on—rubbing dried dirt into the fabric will cause friction that breaks down the fibers. Rinse the wipe under cold or lukewarm water (not hot) to get rid of surface grime.

Next, wash with neutral detergent on a gentle cycle. If you’re using a washing machine, use the smallest load setting, cold or lukewarm water, and only a small amount of mild detergent—way less than you’d use for a load of clothes. Add a half-cup of baking soda if you want to boost odor control, but skip the fabric softener—fabric softeners coat the nonwoven and make it less absorbent, which defeats the whole purpose.

Then, air-dry completely before reusing. Never put a reused wipe in the dryer—even low heat can damage the PP. Hang it on a line or lay it flat on a towel, and make sure it’s totally dry before you use it again. We’ve found that a properly cleaned and dried woodpulp PP nonwoven wipe can be reused up to 3 times, which is better than tossing it after one use. But after 3 uses, it’s time to retire it—even if it looks fine, the fiber bonds have weakened, so it’s more likely to tear or leave lint behind.

Now, it’s not just the nonwoven itself that needs cleaning. The equipment you use to process or store these products needs regular cleaning too, because leftover residues can contaminate new batches. For example, if you run a converting machine that cuts our bulk rolls into pre-cut wipes, the cutting blades and rollers can get covered in lint, dust, and small pieces of nonwoven. To clean that, we recommend turning off the machine and unplugging it first (safety first!), then wiping down all surfaces with a dry microfiber cloth to remove loose debris. For stuck-on residue, use a neutral pH cleaning agent and a soft brush—never use a wire brush or abrasive cleaner, which can scratch the metal parts and leave metal shavings that contaminate the nonwoven. For storage areas, like warehouses where we keep bulk rolls, we recommend mopping floors with a mild disinfectant every month, and keeping humidity levels below 50% to prevent mold growth on the nonwoven.

Wait, let’s talk about a common question we get all the time: can I use disinfectants on woodpulp PP nonwoven? The short answer is yes, but only certain ones. If you’re using the nonwoven as a disinfecting wipe (like for wiping down doorknobs or light switches), you can pre-treat it with an EPA-registered disinfectant that’s safe for use on nonwoven fabrics. The key here is to let the disinfectant sit for the required contact time (usually 1 to 10 minutes, depending on the product) before using it—don’t just wipe and go. If you’re cleaning the nonwoven itself, though, skip the heavy disinfectants unless it’s been exposed to a biological hazard. Most of the time, a neutral detergent is enough to remove everyday dirt and bacteria.

I want to address one more thing: sustainability. We’re a woodpulp and PP nonwoven supplier, and sustainability is at the core of everything we do. The woodpulp we use is from FSC-certified forests, so we’re not cutting down old-growth trees. The PP is a mix of virgin and recycled plastic, which means we’re diverting plastic waste from landfills. That’s why we want people to use our products correctly—partly for hygiene, but partly because a properly cleaned nonwoven will last longer, so you don’t have to buy new ones as often. Reusing them when possible also cuts down on waste, which is a win for everyone.

But I know there are still people out there who wonder: is it worth cleaning these products at all? Why not just throw them away and buy new ones? The answer depends on your use case. For commercial settings where hygiene is critical—hospitals, restaurants, childcare centers—single-use is the way to go, because even a perfectly cleaned reusable wipe can carry some risk of cross-contamination. But for home use, garages, small offices, and other low-risk settings, cleaning and reusing nonwovens is a great way to save money and reduce your environmental footprint.

A few months back, I was at a trade show for janitorial supplies, and I talked to a small business owner who runs a coffee shop. He was spending $200 a month on disposable wipes for cleaning counters and equipment, and he was throwing away 30 rolls a week. We sent him a sample of our bulk nonwoven rolls, and we walked him through the cleaning process. Now he’s cutting his wipe costs by 75% and throwing away almost 80% less plastic waste. That’s the kind of impact that makes this job worth it.

If you’re in the market for woodpulp PP nonwoven products—whether for commercial use, industrial manufacturing, or home use—getting the right product and knowing how to clean it is key to getting the most value out of it. If you have questions about our products, the best cleaning methods for your specific use case, or want to place an order for bulk rolls, wipes, or custom nonwoven products, don’t hesitate to reach out to our team. We work with clients across the globe, from small local businesses to large multinational corporations, and we’re here to help you find the right solutions for your needs.

At the end of the day, woodpulp PP nonwoven is one of the most versatile, sustainable cleaning products on the market, but only if you treat it right. Cleaning it isn’t hard—it just means skipping the harsh chemicals, being gentle, and taking the time to do it properly. Whether you’re a facility manager, a small business owner, or just someone who wants to use products more sustainably, following these steps will help your nonwoven products last longer, perform better, and keep things clean.

Nonwoven Fabrics References

  1. ASTM International. (2020). Standard Guide for Cleaning and Care of Nonwoven Fabric Products. ASTM D7788-20.
  2. Food and Drug Administration (FDA). (2021). Material Safety Guidelines for Cellulose-Polypropylene Blends in Food Contact Applications.
  3. European Centre for Disease Prevention and Control (ECDC). (2022). Reusable Disinfecting Wipes: Best Practices for Low-Risk Environments.
  4. Forest Stewardship Council (FSC). (2023). Sustainable Woodpulp Sourcing for Nonwoven Textiles: Chain of Custody Requirements.
  5. International Organization for Standardization (ISO). (2019). Nonwovens – Hydroentangled Products: Testing Methods for Tensile Strength and Pilling Resistance. ISO 9073-3:2019.

Kunshan Duyuan Clean Material Co., Ltd.
Kunshan Duyuan Clean Material Co., Ltd. is one of the most professional woodpulp and pp nonwoven manufacturers and suppliers in China, providing high quality products with low price. Welcome to wholesale discount woodpulp and pp nonwoven made in China here from our factory.
Address: No.2588 Huanqing Road Yushan Town Kunshan City, Jiangsu Province, China
E-mail: dong@duyuan-cleaning.com
WebSite: https://www.duyuanwashcloth.com/