Posted in

Can cable ties be used for securing tarps?

If you’ve ever found yourself staring at a flapping tarp on a trailer, a backyard storage bin, or a construction site, you’ve probably wondered: can cable ties actually hold that thing down? Let’s cut to the chase here—we’re a cable ties supplier, and we get this question all the time. It’s not a silly one, either. Tarp-related messes (and injuries) are way too common when people use flimsy, overrated gear, so it’s worth breaking this down with actual context, not just random online takes. Cable Ties

First, let’s ground this in what both cable ties and tarps are designed for. Most standard cable ties are made of nylon 6/6, a tough thermoplastic that’s resistant to UV rays, moisture, and moderate temperatures—perfect for outdoor use. Tarps, on the other hand, come in all kinds: heavy-duty polyethylene for landscaping, canvas for boat covers, vinyl for flatbed trailers. The key here isn’t just “can you thread a cable tie through the grommets of a tarp?” It’s “will that tie hold up over time and through whatever stress you throw at it?”

Let’s start with the basics: yes, cable ties absolutely work for securing tarps—when you use the right type. A lot of people grab the first 100-pack of basic cable ties they find at the hardware store, and those are the ones that snap mid-delivery or fray after a week in the sun. We’ve seen this happen so often that it’s why our team puts so much stock in matching tie type to the job. For example, if you’re securing a light landscaping tarp over firewood, a standard UV-stabilized nylon tie works fine. But if you’re strapping a heavy vinyl tarp to a flatbed that’s going 60 mph down the highway? You need a heavy-duty, extra-wide tie—usually 0.5 inches wide or bigger, with a tensile strength of at least 150 lbs. That’s non-negotiable; the basic 40-lb zip ties at the checkout lane aren’t built for that kind of load.

Wait, but let’s talk about common mistakes here—because even the right tie can fail if you’re using it wrong. First, never just thread a single tie through one tarp grommet and call it a day. Grommets are there to distribute force, but one tie pulling on one spot will put all the stress on that tiny area. Instead, run a length of cord or even a thin metal wire between two adjacent grommets, then use two or three cable ties to secure the tarp to that cord. That spreads the tension out, so you’re not overloading a single tie. Another mistake: overtightening. I know, it feels like you want to make that tarp as tight as a drum, but nylon can stretch a little—over-tightening will make the tie brittle, especially in cold weather, and it’ll snap way faster than it should. We always tell customers to tighten the tie until there’s a tiny bit of give, just enough so the tarp doesn’t flop around when there’s a light breeze.

What about outdoor conditions? That’s where a lot of people stumble. Basic cable ties will degrade after 3-6 months in direct sunlight—polyethylene tarps might hold longer, but the ties will turn brittle and crack. That’s why UV-stabilized cable ties are a game-changer for outdoor tarp jobs. We test our UV-rated ties in accelerated weathering chambers, which simulate years of sun exposure in a matter of weeks, and they still hold 90% of their original strength. For marine use, where saltwater is a factor, we also offer stainless steel ball cable ties—those are corrosion-proof, so they won’t rust or snap even if they’re submerged in saltwater for months. We had a customer last year who used our stainless steel ties to secure a boat tarp during a cross-Atlantic sail, and he told us they held up through rough seas and salt spray way better than any rope or bungee cord he’d used before. That’s the kind of real-world test you can’t get from a lab report.

Now, let’s address the elephant in the room: should you ever use cable ties instead of rope or bungee cords? It depends, but here’s the short answer: cable ties are a great backup, but they’re not always a replacement. If you need a permanent, heavy-duty tarp solution for a construction site where the tarp will be up for a year or more, combining cable ties with ratchet straps is the way to go. The ties keep the tarp from flapping, and the straps take the main load. For temporary jobs—like covering a load of mulch for a weekend landscaping project, or securing a tarp over a camping gear storage bin for a month—cable ties alone work perfectly. They’re cheap, easy to apply even by one person, and you can cut them off and reuse them if you need to adjust the tarp later (pro tip: use a pair of wire cutters or scissors that’s sharp—dull blades will fray the tie end, making it hard to unzip).

Wait, let’s get specific about load capacity, because that’s where a lot of misinformation lives. A standard 0.18-inch wide nylon cable tie has a tensile strength of about 40 lbs. That’s fine for a light tarp over a small garden cart, but for a full-size flatbed tarp, you’re looking at 100+ lbs per tie. Our heavy-duty 0.5-inch wide ties hit 250 lbs of tensile strength, which is more than enough for most highway loads. We did a test last month where we strapped a 10×20 vinyl tarp to a pickup bed, loaded it with 1,000 lbs of gravel, and drove 200 miles on the interstate—all our ties held, no issues. That’s the kind of data we share with customers because we don’t want them wasting money on ties that won’t do the job, or worse, having a load come loose and cause an accident.

Another thing people don’t think about: what about the sharp edges on tarps? A lot of tarps have reinforced edges, but even so, a thin tie rubbing against a sharp grommet or a metal frame can wear through the tie over time. The fix here is simple: add a small piece of rubber grommet or even a soda can tab between the tie and the tarp edge. That creates a buffer, so the nylon doesn’t rub against the sharp metal, and your tie will last 2-3 times longer. We included free rubber buffers with every bulk order for our tarp customers last year, and the feedback was amazing—people said their ties stopped failing halfway through projects after they started using them.

Now, let’s talk about when cable ties aren’t the right choice. If you’re in an area with extreme cold—say, temperatures below 20°F—standard nylon ties get brittle, so they’re more likely to snap when you pull them tight. In that case, we recommend our low-temperature-rated cable ties, which are formulated to stay flexible down to -40°F. For really large tarps, like a 20×40 construction tarp, you might want to use a mix of cable ties and heavy-duty rope—ties for the middle sections to keep the tarp taut, and rope for the corners to handle the extra pull from wind. And if you need to remove and reattach the tarp multiple times, cable ties can be a pain (you have to cut them and tie new ones every time) so bungee cords or adjustable straps are better for that. But for one-time, long-term, or high-stress tarp jobs, cable ties are hard to beat.

As a supplier, we’ve seen every mistake in the book when it comes to tarp and cable tie use. We’ve had a guy call us in a panic because his load of lumber had his tarp fly off on the highway—turns out he used 10-cent basic ties that snapped at 40 mph. We sent him a bulk pack of our heavy-duty UV ties for free, and he texted us a month later saying he’d used them on three more loads, no issues. We’ve also had a backyard gardener who used our small UV ties to secure a tarp over her tomato plants during a late frost—she said they kept the tarp on even when the wind hit 30 mph, which rope had never done before. That’s the real value here: cable ties aren’t a one-size-fits-all solution, but when you pick the right type for your job, they’re reliable, cost-effective, and way easier to use than most alternatives.

So to wrap this up: yes, cable ties can absolutely be used for securing tarps—if you choose the right type, use them correctly, and match them to your job’s conditions. Skip the cheap, no-name 100-packs, go for UV-stabilized or heavy-duty ties depending on your outdoor exposure, spread the tension across multiple points, and add a buffer for sharp edges. If you’re not sure which ties to get for your specific tarp job—whether it’s a camping setup, a flatbed load, or a construction project—hit us up, we can help you pick the right ones. We don’t do one-size-fits-all advice here, because we know every tarp and every job is different.

If you’re in the market for cable ties for your next tarp project, we’re here to help you find exactly what you need. Reach out to our team to chat about your requirements, order samples, or get a custom quote for bulk needs.

Wire Connectors References

  1. Society of Automotive Engineers (SAE) International. “Performance Specifications for Thermoplastic Cable Ties for Transportation Applications.” SAE Standard J1517, 2021.
  2. American Society for Testing and Materials (ASTM). “Standard Test Methods for UV Exposure of Plastics.” ASTM D4329, 2019.
  3. National Institute for Occupational Safety and Health (NIOSH). “Workplace Safety for Outdoor Load Securing and Tarp Installation.” NIOSH Publication 2022-105, 2022.
  4. DuPont Technical Information. “Nylon 6/6 Properties for Outdoor Thermoplastic Applications.” DuPont Bulletin B-001, 2020.

Changhong Plastics Group Imperial Plastics Co., Ltd.
Changhong Plastics Group Imperial Plastics Co., Ltd. is well-known as one of the leading cable ties manufacturers and suppliers in China. Please feel free to buy or wholesale high quality cable ties for sale here from our factory. For price consultation, contact us.
Address: 4999 Express Way, Xinwu Economic Development Zone, Wuhu City, Anhui Province, China
E-mail: maggie@chs.com.cn
WebSite: http://www.chs-cabletie.com/