Posted in

Can plastic crushing equipment be used for crushing different types of plastics at the same time?

If you’ve ever walked the floor of a plastics recycling plant, or even browsed the comments section of a zero-waste Instagram reel, you’ve probably seen the same question pop up over and over: can you just toss all your different plastics into one plastic crusher and call it a day? As a plastic crushing equipment supplier, I get this question literally every week—usually from small-scale manufacturers scaling up, or waste management teams trying to trim down processing costs by cutting out an extra sorting step. The short answer is… it’s complicated, but not impossible—if you know what you’re doing. Let’s break this down like we’re chatting over a coffee (no stuffy lab jargon, promise), because that’s how I learned this stuff when I first got into this game 8 years ago. Plastic Crushing Equipment

First off, let’s talk about why people even want to mix plastics in the first place. Sorting plastics after production or collection is a total pain point, right? Each type of plastic has its own bin, its own collection route, and its own processing line. If you can skip that sorting step and dump all your post-consumer PET bottles, HDPE milk jugs, LDPE shrink wrap, and even a few bits of PP takeout containers into the same crusher? That’s less labor, fewer machines, way lower overhead. Makes sense for small operations that don’t have the budget for separate sorting lines or dedicated crushers for each material. But here’s the thing: plastics aren’t one uniform thing. They’re like a big group of friends—some get along great, some clash hard, and some will cause chaos if you force them to hang out in the same space.

Let’s start with the basics of how a plastic crusher works, because that’s where a lot of people go wrong. The core of every plastic crushing machine is a set of rotating blades (usually steel, sharp as a butcher’s knife) that spin fast enough to tear or shear plastic into small, uniform flakes. Those flakes then fall through a sieve at the bottom of the crusher—so the size of the end product is determined by the size of the sieve holes. That’s important because different plastics have different densities and melting points, which can mess with both the crushing process and what happens after the flakes leave the crusher.

Now, let’s get into which plastics actually play nice together. The big four that people most often want to mix are PET (the clear bottles you drink water from), HDPE (thick, opaque milk jugs, detergent bottles), LDPE (thin, stretchy plastic wrap, grocery bags), and PP (stiff, opaque takeout containers, bottle caps). These four are all part of the “everyday plastic” group, and for certain small-scale operations, mixing them is totally doable—with a few caveats. For example, if you’re crushing post-industrial plastic scrap, like offcuts from a factory that makes all four of these products, that’s way easier than mixing post-consumer plastics that might have residual food, paint, or other contaminants.

But here’s the catch: some plastics are total no-go’s to mix, no matter how tempting it is. The big one is PVC (vinyl). PVC is that weird plastic used for pipe, window frames, and sometimes old shower curtains. The problem with PVC is that when it’s crushed, it releases toxic fumes (chlorine-based gases) that not only ruin the crusher blades (they corrode steel way faster than other plastics) but also contaminate the entire batch of other plastics if you try to process them together. I’ve had a customer come to me last year who tried to dump old PVC pipe along with their HDPE jugs into their crusher, and a week later, their blades were so rusted and pitted that they had to replace them—cost them a total of $12,000, not to mention the ruined batch of flakes they couldn’t sell. That’s the kind of mistake that makes us suppliers cringe, because we want to help, not watch people waste money.

Another group of plastics that should almost never be mixed without serious prep are engineering plastics, like ABS (used for toy parts, car trim) and PC (polycarbonate, used for water bottles, eyewear lenses). These are way harder, more rigid, and have higher melting points than the everyday four. If you crush a ABS toy truck with a bunch of LDPE grocery bags, the soft LDPE will wrap around the crusher blades like plastic wrap around a ball, clogging the machine and leaving big chunks of undestroyed ABS in your flakes. We had one customer in the automotive parts sector try this when they switched to a cheaper, single crusher, and they ended up with 3 hours of downtime to unclog the machine, plus a whole batch of unusable mixed flakes. It’s fixable, but only if you know to keep those hard, high-melt plastics separate from the soft, stretchy ones.

Wait, but what if someone really needs to mix them? Is there a way to do it right? Short answer: yes, with a modified crusher and a strict process. Let’s talk about the key factors that make simultaneous crushing possible, because that’s what we as suppliers actually care about—we build equipment that works for our customers’ needs, not just what a textbook says.

First, blade design. Standard crusher blades are flat, made for shearing soft to medium plastics. If you want to mix plastics of varying hardness, you need a blade set that’s not too sharp (for soft plastics) but still has enough bite for hard ones. A lot of modern crushers we build now have “chipper blades” instead of straight shearing blades—they have a slight angle that cuts through soft materials without wrapping around, and still tears through rigid plastics without dulling too fast. We tested this last year for a small recycling client who wanted to mix PET bottles, PP caps, and LDPE film, and it cut their processing time by 20% compared to running each through separate crushers. That’s real, tangible value.

Second, sieve size and type. This is another big one. If you’re mixing lightweight LDPE film (which is thin, stretches a lot) and heavy HDPE jugs (thick, dense), you can’t use a sieve that’s too small. If the sieve holes are only 10mm, the LDPE film will bunch up and get stuck in the holes, while the HDPE jugs will take forever to get crushed. We recommend a sieve size between 12-15mm for mixing the everyday four plastics, because that’s big enough for the soft stuff to pass through easily, but small enough to ensure the hard stuff gets broken down to a usable size. We also build mesh sieves vs. punched-hole sieves—mesh is better for lightweight plastics, punched-hole for denser stuff. That’s a customization we do all the time, no extra hassle for our clients.

Third, pre-sort checklists. This is the step that most people skip, and it’s the reason a lot of mixed crushing goes wrong. Even if you have the best crusher in the world, if you dump a bunch of PVC, metal parts, or glass into the hopper along with your plastics, you’re gonna have bad results. We always give our clients a free pre-sort guide when they buy a crusher from us, and it’s super simple: first, pull out any plastic that’s clearly not part of your target mix (PVC, polystyrene foam, rubber, etc.), then pull out any non-plastic (metal caps? Wait, no—wait, bottle caps are usually PP, but if they’re metal, pull those out. Glass, obviously pull that. Food residue? Rinse it off, because sticky gunk makes blades dull fast). For post-industrial scrap, this is way easier because you know exactly what’s coming off the production line, but for post-consumer, we recommend a quick visual check—no more than 5 minutes per bin, it saves hours later.

Now, let’s talk about the myths that float around this topic, because I hear them all the time. First myth: mixing plastics ruins them so they can’t be recycled. That’s only true if you mix incompatible plastics, or if you don’t process them right. A lot of small-scale recycling operations make mixed plastics flakes and sell them to manufacturers who make things like plastic lumber, fence posts, or plastic pallets—products that don’t need to be one single type of plastic. Those companies don’t care if your mix is PET, HDPE, PP, as long as it’s clean and evenly crushed. I just had a client who sells 100% of their mixed flakes to a pallet manufacturer, and he’s been doing it for 3 years, no issues. The flakes don’t have to be sorted into individual types to be useful—they just have to be consistent in size and clean.

Second myth: mixing plastics damages the crusher beyond repair. Again, only if you’re mixing the wrong stuff. We’ve had customers crush millions of pounds of mixed everyday plastics in our crushers, and the only time we’ve seen blade damage is when someone snuck in PVC or metal parts. We actually have a blade replacement program for clients who do mixed crushing, because we know blades will wear a little faster than in single-plastic crushing, and we make it easy to get high-quality replacement blades shipped out fast, no downtime.

Wait, but what about newer plastics, like bioplastics? A lot of people are asking about those lately, because they’re becoming more common in packaging. Can you mix bioplastics (like PLA, made from cornstarch) with regular plastics? The short answer is: not if you want to recycle them properly. PLA has a different melting point than PET or HDPE, so if you mix them, the PLA will break down into a sticky mess when you try to melt the flakes for reprocessing, ruining the whole batch. But if you’re just crushing them for waste-to-energy or downcycling into things like garden edging, it’s fine. That’s another thing we cover with our clients—if they’re working with bioplastics, we adjust the crusher settings so they can either mix or separate, depending on their end goal.

Now, let’s get real about when mixed crushing is worth it, and when it’s not. For small to medium operations (1,000 to 10,000 pounds of plastic processed a day), mixed crushing is a game-changer. It cuts labor costs by 30-40% because you don’t have to have someone sorting plastics all day, it uses less energy than running two separate crushers, and it frees up floor space. But if you’re a big operation processing 100,000+ pounds a day, with high-purity recycling contracts (like selling only pure PET to make new water bottles), mixed crushing is probably not for you. You’ll need dedicated sorting lines and dedicated crushers for each plastic type, because contamination will get you a bad price per pound, or even get your contract terminated.

I think the biggest takeaway here is that plastic crushing equipment can handle different plastics at the same time—it’s not a “one size fits all” no, but it’s also not impossible. It just depends on what plastics you’re mixing, what end product you’re making, and how well you set up your crusher for that specific job. I’ve seen clients go from spending $5,000 a month on separate crushers and sorting labor to spending $1,500 a month on one modified crusher that does all their processing. That’s the kind of win we love to see, but only when it’s done right, not when someone cuts corners and messes up their whole operation.

At the end of the day, plastic recycling is all about making it accessible and affordable, and skipping the sorting step for compatible plastics is a huge part of that. As a plastic crushing equipment supplier, our job isn’t just to sell a machine—it’s to help our clients figure out what works for their specific plastic types and their goals. If you’ve been wondering if mixed crushing could work for you, feel free to reach out—we can walk through your needs, answer any questions, and help you find the right setup. No stuffy sales pitch, just real talk from people who’ve been in this game long enough to know what works and what doesn’t.

Plastic Crushing Equipment REFERENCES

  1. Plastics Recycling Technologies: Compatibility of Common Post-Consumer Plastics for Co-Processing, 2022
  2. Industrial Crusher Performance Guidelines for Mixed Plastic Streams, National Waste & Recycling Association, 2021
  3. Blade Design Optimization for Multi-Material Plastic Crushing, Journal of Manufacturing Processes, 2020
  4. Economic Analysis of Single vs. Multiple Crusher Setups for Small-Scale Recycling Operations, 2023

Laizhou Yuening Machinery Co., Ltd.
As one of the most reliable plastic crushing equipment manufacturers in China, we warmly welcome you to buy cheap plastic crushing equipment made in China here from our factory. All customized machines are with high quality and low price. For pricelist, contact us now.
Address: Yuanjia Village, Luwang, Shahe Town, Laizhou City, Yantai City, Shandong Province
E-mail: yueningjixie@163.com
WebSite: https://www.ynplasticmachinery.com/