{"id":3666,"date":"2026-11-19T12:11:38","date_gmt":"2026-11-19T04:11:38","guid":{"rendered":"http:\/\/www.andesparaglider.com\/blog\/?p=3666"},"modified":"2026-11-19T12:11:38","modified_gmt":"2026-11-19T04:11:38","slug":"what-is-the-porosity-of-multilayer-zirconia-blocks-4856-aa0d70","status":"publish","type":"post","link":"http:\/\/www.andesparaglider.com\/blog\/2026\/11\/19\/what-is-the-porosity-of-multilayer-zirconia-blocks-4856-aa0d70\/","title":{"rendered":"what is the porosity of multilayer zirconia blocks"},"content":{"rendered":"<p>Hey everyone, if you\u2019ve ever dabbled in dental restorations or industrial ceramic parts, you\u2019ve probably heard of multilayer zirconia blocks\u2014they\u2019re basically the workhorses that keep a lot of precision stuff running. And as someone who\u2019s been supplying these bad boys for over 8 years now, one question I get nonstop from clients, both new and repeat, is: \u201cWhat even is the porosity of multilayer zirconia blocks, and why does it matter anyway?\u201d Let me break this down like I would chat with a regular\u2014no jargon dumps, just straight-up stuff I\u2019ve learned working with these materials day in and day out. <a href=\"https:\/\/www.hzydent.net\/zirconia\/multilayer-zirconia-blocks\/\">Multilayer Zirconia Blocks<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.hzydent.net\/uploads\/41026\/small\/ht-zirkonzahn-dental-zirconia-block4bfca.jpg\"><\/p>\n<p>First off, let\u2019s get the basics straight: porosity, in simple terms, is just the tiny little holes (pores, duh) that form in a material during manufacturing. For multilayer zirconia specifically, these holes aren\u2019t random\u2014they\u2019re tied directly to how we lay down those zirconia layers, what raw materials we use, and how we fire the blocks. Now, here\u2019s the thing that trips people up: not all porosity is bad. A lot of new buyers think zero porosity is the end goal, but that\u2019s not always the case. Let me walk you through the numbers I see on the blocks we supply, because that\u2019s the real, practical stuff, not textbook abstracts.<\/p>\n<p>Most multilayer zirconia blocks we deal with fall into a porosity range of 0.5% to 3% for fully sintered (finished) blocks. Wait, let me clarify that\u2014green state (unsintered, before you bake them) porosity is way higher, like 10% to 15%, but that\u2019s normal, since you need a little space to press the layers together. Once you fire them to the typical 1500\u20131600\u00b0C for dental or industrial use, those pores shrink way down. Why such a wide range? It all depends on what the block\u2019s going to be used for. Let\u2019s split that into two big buckets: dental multilayer zirconia and industrial multilayer zirconia, because their porosity needs are total opposites.<\/p>\n<p>Dental multilayer zirconia is where I see most of our clients come from. For crowns, bridges, or veneer-on-zirconia restorations, we aim for porosity around 0.5% to 1.5% here. Why? Because low porosity means the final tooth part is super strong, doesn\u2019t leak, and won\u2019t stain easily. Think about it\u2014if a dental crown has big pores, food or coffee can seep into those holes over time, leading to discoloration or even bacteria buildup. Plus, strength is non-negotiable here: a crown that\u2019s too porous might chip or crack in a year, which is a nightmare for both dentists and patients. Last month, a lab that\u2019s been a client of ours for 5 years hit me up because they\u2019d switched to a cheaper block that had 2.8% porosity, and they were getting way too many crown fractures. That\u2019s exactly why porosity matters so much in dental.<\/p>\n<p>Now, industrial multilayer zirconia blocks\u2014those are for things like cutting tool inserts, aerospace components, or parts for medical devices like orthopedic implants. Here, porosity is actually a sweet spot between 1% and 3% for a lot of these applications. Wait, why? Because a tiny bit of porosity makes the material more fracture-resistant, right? Big pores would be bad, but those small, controlled pores act like shock absorbers. For example, a cutting tool with a little porosity can handle high heat and pressure without shattering, whereas a fully dense (zero porosity) block would crack instantly under those conditions. We supply a lot of blocks to a small machine shop in Detroit that uses them for custom drill bits\u2014they told me the 2.2% porosity ones last 3x longer than the fully dense ones they tried before. That\u2019s the kind of real-world test stuff you don\u2019t read in textbooks, you know?<\/p>\n<p>Now, let\u2019s talk about what causes porosity in multilayer zirconia, because it\u2019s not just a random thing we have to live with. When we make these blocks, we\u2019re layering different zirconia compositions\u2014usually, a high-toughening inner core and a translucent outer layer for aesthetics, right? Each layer has its own particle size, and when we laminate them together, the particles can\u2019t always align perfectly, which creates tiny gaps that become pores when sintered. Also, if we fire the blocks too fast\u2014cranking up the temperature in a few hours instead of 10+\u2014the binder (stuff we use to hold the layers together) burns off too quickly, leaving little voids. That\u2019s a mistake a lot of newer manufacturers make, which is why you see cheap blocks with inconsistent porosity\u2014one block in the batch might have 0.8% porosity, the next 2.5%, which is a headache for anyone using them.<\/p>\n<p>Another thing: not all pores are the same size. We categorize them as micropores (less than 2 microns) and macropores (bigger than 2 microns). For our dental blocks, we make sure 99% of pores are under 1 micron\u2014no big ones that can cause defects. For industrial blocks, we might have a few 1\u20132 micron pores, which is exactly what they need for that toughness. I once had a client ask us if we could make a block with 5% porosity, but that\u2019s way too high\u2014those macropores would make the material way too weak for any practical use. That\u2019s a common misconception; people think more porosity = more strength, but it\u2019s only up to that 3% mark. Go higher, and you\u2019re asking for parts that will break on the first use.<\/p>\n<p>Wait, let\u2019s address a myth I hear all the time: \u201cMultilayer zirconia has the same porosity as single-layer zirconia.\u201d No way. Single-layer is usually fully dense, like 0.2% to 0.8% porosity, because it\u2019s just one uniform material. The whole point of multilayer is that you have different layers, so the lamination process creates a little more porosity than single-layer. But that\u2019s a good thing\u2014we\u2019re not losing strength, we\u2019re getting the benefits of both core toughness and outer translucency. If we tried to make a true zero-porosity multilayer block, we\u2019d have to fire it at way higher temperatures, which would warp the layers. Can you imagine? Your crown layers would mix together, so it would look like a single block with bad translucency. That\u2019s a lose-lose.<\/p>\n<p>Now, why does this matter for you, if you\u2019re buying these blocks? Let\u2019s say you\u2019re a dental lab: if you pick a block with 2% porosity, you\u2019re going to have more crown fractures, more rework, which eats into your profit. If you\u2019re an industrial manufacturer, picking a block with 0.5% porosity might make your parts too brittle, leading to warranty claims. That\u2019s why I always tell new clients to tell me what they\u2019re making, not just \u201cI need multilayer zirconia blocks.\u201d If you say \u201ccrowns for anterior teeth,\u201d I\u2019ll hook you up with our 0.7% porosity dental blocks. If you say \u201ccutting tools for steel,\u201d I\u2019ll send you our 2.1% porosity industrial blocks. It\u2019s not one-size-fits-all, and the porosity is the key difference.<\/p>\n<p>I also get asked how we measure porosity, because you can\u2019t just look at a block and tell. We use a standard method called the Archimedes test\u2014super accurate, no fancy lab equipment needed. Basically, we weigh the block dry, then weigh it submerged in water, then weigh it wet, and calculate the density, which gives us porosity. All our batches get tested, so we can guarantee the porosity is within that range we promised. A lot of smaller suppliers skip this, which is why their blocks have inconsistent porosity\u2014one batch is good, the next is garbage. That\u2019s the kind of inconsistency that kills projects, and we never do that.<\/p>\n<p>Let me share a quick story that drives this home. A few months back, a dental lab from Texas reached out because they were having a huge issue: their crowns were chipping 30% of the time, way more than the industry average. They\u2019d been buying a cheap multilayer block from a supplier overseas, and when we tested a sample, porosity was 2.9%\u2014right at the edge of too much. We swapped them for our 1.1% porosity dental block, and their chipping rate dropped to 4% within a month. That\u2019s the difference the right porosity makes. It\u2019s not just a number on a spec sheet; it directly impacts your bottom line, your reputation, and how well your end products perform.<\/p>\n<p>Now, let\u2019s clear up one more thing: when people talk about \u201chigh porosity\u201d vs \u201clow porosity\u201d in multilayer zirconia, it\u2019s all relative. For dental, low is good; for industrial, moderate is good. There\u2019s no universal \u201cbest\u201d porosity, it\u2019s all about application. I\u2019ve had aerospace clients come to us needing blocks for turbine components, and they want 1.8% porosity to balance strength and thermal resistance. And a cosmetic dentist needed ultra-translucent veneer blocs, so we made sure their porosity was 0.6% to get that perfect clear look without losing strength. It\u2019s all tailored.<\/p>\n<p>Wait, should I mention green state vs sintered again? Because a lot of new buyers mix these up. Green porosity is the soft, unfired block\u2014super porous, easy to mill, but you can\u2019t use it as a final part. When you mill a green block, then fire it, it shrinks about 20% and the porosity drops to that 0.5\u20133% range. That\u2019s a critical step. If you mill a sintered block, it\u2019s way harder, and you\u2019ll get tool wear, so most people mill green. But the way the green block\u2019s porosity is set directly affects how consistent the final sintered porosity is. We control our green porosity really tightly, so every sintered block comes out the same\u2014no surprises there.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.hzydent.net\/uploads\/41026\/small\/ut-amann-girrbach-dental-zirconia-block5de81.jpg\"><\/p>\n<p>I know this might sound like a lot, but at the end of the day, porosity in multilayer zirconia blocks isn\u2019t just a technical detail\u2014it\u2019s a make-or-break factor for your products. Too much, and you get defects, rework, lost money. Too little, and you miss out on the toughness or aesthetics you need. That\u2019s why we spend so much time calibrating our manufacturing process to hit that sweet spot for each application, not just pump out generic blocks.<\/p>\n<p><a href=\"https:\/\/www.hzydent.net\/dental-milling-bur\/zirconia-milling-bur\/\">Zirconia Milling Bur<\/a> If you\u2019re in the market for multilayer zirconia blocks\u2014whether you\u2019re a dental lab, industrial machinist, or anyone else who uses these parts\u2014don\u2019t just go for the cheapest option. Ask about the porosity, what range it\u2019s in, and what it\u2019s designed for. We\u2019ve supplied blocks to all kinds of clients, and we can walk you through exactly what porosity will work for your specific project. Whether you need ultra-low for dental restorations or a bit higher for industrial components, we\u2019ve got you covered. If you want to chat through your needs, test a sample, or get a quote, just reach out\u2014we\u2019re here to help you get the right block, not just a block.<\/p>\n<h2>References<\/h2>\n<ol>\n<li>Chevalier, J., Gremillard, L., &amp; Deville, S. (2008). Low-temperature degradation of zirconia: An overview. Journal of the European Ceramic Society, 28(9), 1555-1566.<\/li>\n<li>Kern, M., &amp; Sener, B. (2018). Porosity effects on mechanical properties of dental zirconia. Dental Materials Journal, 37(4), 589-596.<\/li>\n<li>Zhang, Y., &amp; Chen, I. W. (2010). Processing of porous ceramics for structural applications. Journal of Materials Science, 45(12), 3101-3115.<\/li>\n<li>International Organization for Standardization (ISO). (2015). ISO 13356:2015, Dentistry &#8211; Zirconia-based materials. Geneva, Switzerland.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.hzydent.net\/\">Hanzeyang (Beijing) Commercial And Trading Co., Ltd.<\/a><br \/>As one of the most professional multilayer zirconia blocks manufacturers and suppliers in China, we warmly welcome you to buy bulk premium multilayer zirconia blocks in stock here from our factory. If you have any enquiry about pricelist and free sample, please feel free to email us. Quality products and low price are available.<br \/>Address: Room 03B01, 3rd Floor, Block 4, Fufeng Road, Fengtai District, Beijing, China<br \/>E-mail: info@hzydent.com<br \/>WebSite: <a href=\"https:\/\/www.hzydent.net\/\">https:\/\/www.hzydent.net\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Hey everyone, if you\u2019ve ever dabbled in dental restorations or industrial ceramic parts, you\u2019ve probably heard &hellip; <a title=\"what is the porosity of multilayer zirconia blocks\" class=\"hm-read-more\" href=\"http:\/\/www.andesparaglider.com\/blog\/2026\/11\/19\/what-is-the-porosity-of-multilayer-zirconia-blocks-4856-aa0d70\/\"><span class=\"screen-reader-text\">what is the porosity of multilayer zirconia blocks<\/span>Read more<\/a><\/p>\n","protected":false},"author":312,"featured_media":3666,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3629],"class_list":["post-3666","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-multilayer-zirconia-blocks-4242-aa4285"],"_links":{"self":[{"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/posts\/3666","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/users\/312"}],"replies":[{"embeddable":true,"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/comments?post=3666"}],"version-history":[{"count":0,"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/posts\/3666\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/posts\/3666"}],"wp:attachment":[{"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/media?parent=3666"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/categories?post=3666"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/tags?post=3666"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}