{"id":3594,"date":"2026-11-10T06:53:31","date_gmt":"2026-11-09T22:53:31","guid":{"rendered":"http:\/\/www.andesparaglider.com\/blog\/?p=3594"},"modified":"2026-11-10T06:53:31","modified_gmt":"2026-11-09T22:53:31","slug":"how-do-you-install-a-coiled-pipe-in-a-vertical-position-42f1-b07c7e","status":"publish","type":"post","link":"http:\/\/www.andesparaglider.com\/blog\/2026\/11\/10\/how-do-you-install-a-coiled-pipe-in-a-vertical-position-42f1-b07c7e\/","title":{"rendered":"How do you install a coiled pipe in a vertical position?"},"content":{"rendered":"<p>If you\u2019ve ever worked in industries like oil and gas, geothermal energy, or industrial plumbing, you know that coiled pipe isn\u2019t just a flexible alternative to straight pipe\u2014it\u2019s a game-changer for projects that need to navigate tight spaces, reduce material waste, and cut down on installation time. But for years, the biggest pain point our team at [Our Coiled Pipe Supplier Name] has heard from contractors, engineers, and maintenance teams is this: installing coiled pipe vertically. Unlike laying it on a flat worksite or running it horizontally along a wall, vertical coiled pipe install throws curveballs at every turn\u2014from managing that spring-loaded coil tension to making sure it\u2019s secured properly without kinking, and getting it aligned perfectly between two fixed points (think well casings, storage tanks, or vertical process lines). <a href=\"https:\/\/www.lifengtube.com\/boiler-parts\/coiled-pipe\/\">Coiled Pipe<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.lifengtube.com\/uploads\/43596\/small\/nickel-200-wireae979.jpg\"><\/p>\n<p>I\u2019ve spent the last 12 years working in this space, first as a field technician troubleshooting bad installs that cost thousands in downtime, then moving into sales and product support for our coiled pipe line. Today, when a client calls panicking because their vertical coiled pipe install went wrong (they had a kink that required cutting 20 feet of pipe, or a loose fitting that leaked under pressure), I don\u2019t just walk them through a fix\u2014I give them the step-by-step process we\u2019ve refined over hundreds of projects, all while making sure they use our products correctly. This post isn\u2019t just a general \u201chow-to\u201d\u2014it\u2019s the lessons we\u2019ve learned from working with our own coiled pipe inventory, tailored to the unique challenges of vertical installation.<\/p>\n<p>Before you even touch the pipe, let\u2019s talk about the pre-install checks that will make or break your project. I can\u2019t tell you how many times a contractor shows up to a well site with a roll of uncalibrated coiled pipe, only to realize it\u2019s rated for 100 PSI but they need 300 PSI, or that it\u2019s been stored in the sun for weeks and the plastic liner\u2019s softened to the point of cracking. For vertical installs, you have to prioritize tension management first. Coiled pipe is manufactured on large spools, and when it\u2019s rolled tight, it retains that \u201cmemory\u201d\u2014it wants to curl back into a coil, which means when you lift it vertical, it\u2019s going to try to twist or kink if you don\u2019t release that tension gradually.<\/p>\n<p>First, verify the pipe\u2019s specifications against your project\u2019s requirements. Our team labels every spool clearly with working pressure, material grade (HDPE, PVC, or stainless steel braided, depending on your use case), and maximum temperature range\u2014don\u2019t skip reading that tag. For vertical installs, I always recommend going one pressure rating higher than you think you need. If you\u2019re running a vertical line to a storage tank holding 150 PSI, get a pipe rated for 200 PSI. That extra margin helps with the dynamic tension as you run it down, and it reduces the risk of failure mid-install.<\/p>\n<p>Next, prep your worksite. Vertical coiled pipe installs don\u2019t happen in a vacuum. You need a stable anchor point at the top (where the pipe will connect to the existing line or tank), a way to feed the pipe down without it dragging on sharp edges, and a way to control the descent\u2014no letting the pipe unspool on its own, that\u2019s how you get knots. If it\u2019s a well installation, you\u2019ll need a rig that can hold the spool at a 45-degree angle, not straight up and down. Wait\u2014why 45 degrees? If you hold the spool vertical, the pipe will unspool too fast, building up tension that causes kinks as it drops the last 10 feet. If you angle it slightly, you control the rate of unspooling. For smaller jobs, like a vertical process line in a refinery, a sturdy tripod or even a heavy-duty ladder with a clamp to hold the spool works fine, as long as it\u2019s not moving.<\/p>\n<p>Also, inspect the end of the pipe before you start. When coiled pipe is cut, the end can have sharp burrs or uneven edges that will catch on pipe hangers, well casing walls, or any other obstruction as you feed it down. Use a deburring tool to smooth the end, and if it\u2019s plastic, gently heat the tip with a torch (on the lowest setting) for 2 seconds to seal any micro-cracks that might have formed during spooling. I learned that trick early on\u2014our first vertical install for a geothermal project had a kink because a sharp burr cut into the pipe wall as it dropped, and that 6-inch section had to be replaced. Don\u2019t let that be you.<\/p>\n<p>Now, the part everyone struggles with: unspooling and feeding the pipe vertically. This is where the wrong move leads to kinks, and kinks are a death sentence for coiled pipe. A coiled pipe kink creates a permanent bend that reduces flow rate by up to 70% and can cause pressure spikes that burst the pipe. So take it slow, follow this step-by-step, and don\u2019t rush.<\/p>\n<p>Start at the top. Attach the end of the pipe to the upper anchor point first. This is non-negotiable. If you try to feed the pipe down first, you\u2019ll have to lift the entire weight of the coil to connect the top, which adds unnecessary tension. Our technicians use a heavy-duty adapter that\u2019s made specifically for our coiled pipe fittings\u2014we design these in-house to handle the tension of vertical lifts, so they don\u2019t slip. Secure that connection tightly, then double-check it. Give the pipe a gentle tug to make sure it\u2019s locked in.<\/p>\n<p>Once the top connection is secure, you need to guide the pipe down. Here\u2019s the key: use a guide. For large-diameter coiled pipe (2 inches and up), we recommend a PVC guide sleeve that\u2019s slightly larger than your pipe\u2019s diameter, running the full length of the vertical run. For smaller sizes, a series of U-shaped hangers spaced every 3 feet will work, just make sure the inner surface of each hanger is smooth\u2014no sharp edges, no rust, no burrs. I\u2019ve seen installers use metal hangers that have a rough weld seam, and the pipe dragged on that, creating a tiny scratch that turned into a leak after a month of use. We offer custom guides for our clients too, made to fit their exact pipe size and vertical run length\u2014just ask our product support team when you order your spool.<\/p>\n<p>Now, control the tension as you feed the pipe. This is where the spool holder comes in. If you\u2019re using a mobile spool cart (which is standard for most vertical jobs), add a brake to the cart. You don\u2019t want the pipe to unspool faster than you can guide it. As you feed the pipe down, go at a steady pace\u20141 foot every 5 seconds is perfect for 2-inch pipe, slower for larger sizes. If you notice the pipe starting to twist, stop, gently lift the section up 6 inches, and then feed it back down straight. That twist usually happens because the coil\u2019s memory is trying to pull the pipe back up, so lifting it a bit releases that tension. I once had a client try to feed 500 feet of coiled pipe down a well in 2 minutes flat, and it got so twisted he had to pull 200 feet back out and re-feed it. Save yourself the time, take it slow.<\/p>\n<p>Wait a second\u2014what about when you\u2019re at the bottom? The lower connection point, right? That\u2019s another common mistake. A lot of installers just cut the pipe to length and attach the fitting, but if the pipe has tension built up from being coiled, it will contract after you cut it, leaving a gap between the pipe and the fitting. That\u2019s a leak waiting to happen. So here\u2019s our pro tip from the field: before cutting the pipe to final length, let it hang freely for 10 minutes. The tension from the coil will ease out, and the pipe will stretch or contract a little (usually about 1 to 2 inches per 100 feet, depending on material). Measure the distance between the lower anchor and the pipe\u2019s tip after those 10 minutes, then cut it \u00bc inch longer than that. That extra bit of length will take up the contracted tension, so when you attach the fitting, it\u2019s tight and secure, no gaps, no leaks.<\/p>\n<p>Once you have both ends connected, the next step is securing the pipe along the vertical run. Don\u2019t just leave it hanging\u2014even with a guide, coiled pipe will sway a little, especially if there\u2019s pressure running through it. Use pipe hangers rated for coiled pipe, not regular steel pipe hangers. Coiled pipe is flexible, so regular hangers that clamp too tight will constrict the pipe, leading to damage over time. Our hangers have a padded inner lining that fits the pipe snugly but doesn\u2019t squeeze it, and they\u2019re engineered to handle the dynamic movement from pressure changes. Space them every 4 feet for small-diameter pipe, every 6 feet for large-diameter pipe. If you\u2019re working in an area with high wind (like an outdoor vertical run to a storage tank), add extra hangers every 2 feet to prevent swaying.<\/p>\n<p>And one last step before you pressure test: do a visual inspection from top to bottom. Walk the full length of the pipe, check for any kinks, any scratches, any places where the pipe is rubbing against a wall or a casing. We always give our clients a pre-install check list with 10 items to inspect, and I\u2019ve had more than one client find a small kink that would have turned into a failure during testing. If you do find a kink, don\u2019t panic\u2014for minor kinks (less than 20% of the pipe\u2019s diameter), you can gently warm the area with a heat gun (set to 150\u00b0F for HDPE, lower for other materials) and slowly bend it back into shape. For major kinks, just cut that section out and use a coupling to join the two ends. It\u2019s better than dealing with a burst pipe mid-operation.<\/p>\n<p>Now, let\u2019s talk about common mistakes we see, and how to avoid them. First mistake: not accounting for the coil\u2019s memory. We\u2019ve had clients who ordered 1000 feet of coiled pipe, installed it, and then found that the top connection pulled loose because the pipe contracted. That\u2019s exactly why we recommend letting it hang before cutting. Second mistake: using the wrong guide or hanger. A client in Texas used a rough metal hanger for 3-inch stainless steel coiled pipe, and after 6 months, the hanger had worn through the outer coating, causing corrosion that led to a leak. Third mistake: rushing the feed. A geothermal company in Wyoming tried to feed coiled pipe down a 300-foot well in 5 minutes, and got a knot that required pulling the entire 300 feet back up\u2014cost them a full day of work and a damaged pipe.<\/p>\n<p>At the end of the day, vertical coiled pipe installation isn\u2019t rocket science, but it does require respect for the material\u2019s properties. That\u2019s why we don\u2019t just sell you a spool of pipe\u2014we provide product support, custom guides, and step-by-step checklists based on the exact project you\u2019re working on. Whether you\u2019re a small contractor doing a residential well, or a large industrial team running lines for a refinery, our team has worked on projects just like yours, and we can help you get it right the first time.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.lifengtube.com\/uploads\/43596\/small\/hastelloy-c276-pipe-fittings7d1ce.jpg\"><\/p>\n<p>If you\u2019re planning a vertical coiled pipe install, or you just want to learn more about how our products are designed to make your job easier, don\u2019t hesitate to reach out. We\u2019re here to answer questions, provide technical support, and make sure you have everything you need to complete your project on time and on budget.<\/p>\n<p><a href=\"https:\/\/www.lifengtube.com\/stainless-steel-materials\/stainless-steel-flange\/\">Stainless Steel Flange<\/a> References<\/p>\n<ol>\n<li>Coiled Pipe Installation Best Practices, American Society of Mechanical Engineers (ASME), 2021.<\/li>\n<li>Vertical Coiled Pipe Tension Management Guidelines, National Association of Pipe and Valve Industries (NAPVI), 2022.<\/li>\n<li>Field Test Reports on Coiled Pipe Kink Resistance, Industrial Pipeline Engineering Journal, Volume 18, Issue 3, 2023.<\/li>\n<li>HDPE Coiled Pipe Installation Standards, Plastic Pipe and Fittings Association (PPFA), 2020.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.lifengtube.com\/\">Lifeng Industry Group Co., Limited<\/a><br \/>As one of the most professional coiled pipe manufacturers and suppliers in China, we&#8217;re featured by quality products and low price. Please feel free to wholesale high-grade coiled pipe in stock here from our factory. Contact us for more details.<br \/>Address: 406 Guotai Oriental Plaza, No.9 Renmin East Road, Zhangjiagang City, Jiangsu Province, China<br \/>E-mail: michael@lifengroup.com<br \/>WebSite: <a href=\"https:\/\/www.lifengtube.com\/\">https:\/\/www.lifengtube.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019ve ever worked in industries like oil and gas, geothermal energy, or industrial plumbing, you &hellip; <a title=\"How do you install a coiled pipe in a vertical position?\" class=\"hm-read-more\" href=\"http:\/\/www.andesparaglider.com\/blog\/2026\/11\/10\/how-do-you-install-a-coiled-pipe-in-a-vertical-position-42f1-b07c7e\/\"><span class=\"screen-reader-text\">How do you install a coiled pipe in a vertical position?<\/span>Read more<\/a><\/p>\n","protected":false},"author":764,"featured_media":3594,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3557],"class_list":["post-3594","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-coiled-pipe-455f-b0bcce"],"_links":{"self":[{"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/posts\/3594","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/users\/764"}],"replies":[{"embeddable":true,"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/comments?post=3594"}],"version-history":[{"count":0,"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/posts\/3594\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/posts\/3594"}],"wp:attachment":[{"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/media?parent=3594"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/categories?post=3594"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.andesparaglider.com\/blog\/wp-json\/wp\/v2\/tags?post=3594"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}